When the clock stops working, it can be unpleasant. So you have to change the display bulb of this Iveco Minivan. Although the dashboard remains functional, it lacks certain information to drive in good conditions. This operation is not complex to perform, but requires a minimum of rigor. We recommend that you take pictures at different stages to remember the reverse process, especially for the connectors. To perform this operation, count about a small half-hour . For tools, a set of screwdrivers is sufficient. Now let's look at how to change this bulb, step by step.change-bulb-clock-Iveco-Minivan

How to change the display bulb of the Iveco Minivan

Depending on the production dates, the methodology may vary a bit. Some covers or screws may differ. We therefore suggest the procedure to follow in general.

  • Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove a few screws. In this case, keep them carefully aside.
  • Once the facade is completely dismantled, you need disconnect connectors connected to the clock bulb of the Iveco Minivan. You can thus remove all the connectors from the block, provided you remember the location. Help yourself by taking pictures if needed.
  • You can normally have access to the broken bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the previous one. The latter must be similar in terms of base and volume. The voltage also obviously.
  • Place the new bulb making sure it is at the bottom of its location.
  • Replace the connectors as they were.
  • Replace all of the front covers.

We invite you to leave a comment if you have encountered specific malfunctions.