When the clock runs out of light, it can be annoying. So you have to change the display bulb jeep cherokee. Even if the dashboard remains functional, we lack several information to circulate comfortably. This manipulation is not difficult to perform, but requires a minimum of rigor. We advise you to take photos at different stages to remember the reverse process, especially for connectors. To perform this task, count approximately a small half-hour . Regarding tools, a pair of screwdrivers should suffice. Now let's take a look at how to change this bulb step by step.change-bulb-clock-jeep-cherokee

How to change the bulb on the display of the jeep cherokee

Depending on the release dates, the procedure may vary a little. It is conceivable that some covers or screws differ. We therefore suggest the procedure to be followed in general.

  • Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to take off some screws. In this situation, keep them preciously aside.
  • Once the facade is completely dismantled, disconnect connectors that connect to the clock bulb of the jeep cherokee. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself with your camera if needed.
  • You can normally access the damaged bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the old one. This must be identical in terms of base and volume. The voltage also of course.
  • Put in the new bulb making sure it is at the bottom of its location.
  • Put the connectors in place as they were.
  • Put all the covers on the front.

We invite you to leave us a comment if you have encountered particular malfunctions.