When the clock stops lighting up, it can be unpleasant. So you have to change the display bulb of the Jeep Comanche. Although the dashboard is still functional, we are missing certain information in order to circulate in sufficient comfort. This operation is not complex to perform, but requires a minimum of thoroughness. We also advise you to take photos at certain stages in order to remember the reverse process, especially regarding connectors. To carry out this operation, count approximately a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's take a look at how to replace this bulb, point by point.
How to change the bulb on the Jeep Comanche display
Depending on the years of production, the methodology may vary a little. It remains likely that some covers or screws differ. We therefore suggest the procedure to be followed in general.
- Start by remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. Therefore, keep them carefully aside.
- Once the facade has been completely removed, disconnect connectors which connect to the clock bulb of this Jeep Comanche. You can therefore remove all of the connectors from the block, provided you remember the location. Help yourself by taking photos if necessary.
- Normally you can have access to the broken bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the old one. The latter must be similar in terms of base and volume. The tension also naturally.
- Put in the new bulb making sure it is at the bottom of its socket.
- Replace the connectors as they were.
- Replace all of the front covers.
You can leave a comment if you have encountered specific concerns.