When the clock stops lighting up, it can be annoying. So we will have to change the display bulb of this jeep compass. Even if the dashboard remains functional, we lack certain indications in order to circulate in good conditions. This operation is not complex to perform, but requires a minimum of rigor. It is advisable to take pictures at certain stages in order to remember the reverse manipulation, especially concerning the connectors. To carry out this manipulation, count approximately a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's see how to replace this bulb, point by point.change-bulb-clock-jeep-compass

How to change the light bulb on the jeep compass display

Depending on the years of production, the methodology may vary a little. It is likely that some covers or screws differ. This is therefore the logic to follow in general.

  • Start by remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. Sometimes you have to remove a few screws. In this situation, keep them preciously aside.
  • Once the facade is completely dismantled, disconnect connectors connected to the jeep compass clock bulb. You can thus remove all of the connectors from the block, provided you remember the location. Help yourself by taking pictures if needed.
  • You can normally have access to the damaged bulb. Gently dismantle the bulb of the clock.
  • Compare the new bulb with the old one. This must be identical in terms of base and volume. The voltage also naturally.
  • Place the new bulb by checking that it is at the bottom of its socket.
  • Replace the connectors as they were.
  • Replace all of the front covers.

Do not hesitate to leave us a comment if you have encountered particular concerns.