When the clock stops working, it can get annoying. So you have to change the display bulb of this Jeep Ford. Even if the dashboard remains functional, we are missing some indications to drive comfortably. This operation is not difficult to perform, but requires a minimum of thoroughness. It is indeed advisable to take photos at certain stages to remind you of the reverse manipulation, especially for connectors. To do this, count about a small half-hour . In terms of tools, a set of screwdrivers will suffice. Now let's take a look at how to replace this bulb step by step.
How to change the bulb on the Jeep Ford display
Depending on the production dates, the method may vary a little. It remains likely that some covers or screws are not identical. We therefore suggest the procedure to be followed in general.
- Start by remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. Therefore, keep them carefully aside.
- Once the facade is completely dismantled, you need disconnect connectors which connect to the clock bulb of this Jeep Ford. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself with your camera if needed.
- You can normally have access to the damaged bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the old one. This should be similar in terms of base and volume. The tension also of course.
- Place the new bulb by checking that it is at the bottom of its socket.
- Replace the connectors in their location.
- Replace all of the front covers.
Do not hesitate to leave a comment if you have encountered specific malfunctions.