When the clock stops lighting up, it can be unpleasant. It will therefore have to change the display bulb of this Jeep Patriot. Although the dashboard remains functional, it lacks some information to circulate in sufficient comfort. This action is not hard to perform, but requires a minimum of rigor. We advise you to take photos at different stages to remember the reverse manipulation, especially for the connectors. To execute this operation, count approximately a small half-hour . In terms of tools, a set of screwdrivers is enough. Now let's see how to replace this bulb, step by step.
How to change the light bulb on the Jeep Patriot display
Depending on the year of release, the methodology may vary a little. Some covers or screws may differ. This is the general approach to follow.
- Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this case, keep them carefully aside.
- Once the facade is completely dismantled, disconnect connectors connected to the clock bulb of your Jeep Patriot. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
- You can normally have access to the damaged bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter should be similar in terms of base and volume. The tension also of course.
- Place the new bulb making sure it is at the bottom of its location.
- Put the connectors in place as they were.
- Put all the covers on the front.
Do not hesitate to leave a comment if you have encountered specific concerns.