When the clock runs out of light, it can get annoying. So you have to change the display bulb of this Jeep Renegade. Although the dashboard is still functional, it lacks several pieces of information to circulate comfortably. This manipulation is not difficult to perform, but requires a minimum of rigor. We also advise you to take photos at certain stages to remember the reverse manipulation, especially regarding connectors. To do this, count roughly a small half-hour . In terms of tools, a pair of screwdrivers is enough. Now let's take a look at how to replace this bulb step by step.change-bulb-clock-Jeep-Renegade

How to change the bulb on the Jeep Renegade display

Depending on the release dates, the methodology may vary slightly. It is possible that several covers or screws differ. We therefore suggest the procedure to be followed in general.

  • Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. In this case, keep them carefully aside.
  • Once the facade is completely dismantled, you need disconnect connectors which connect to the clock bulb of this Jeep Renegade. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself with your camera if needed.
  • You can normally access the damaged bulb. Gently remove the bulb of the clock.
  • Compare the new bulb with the previous one. The latter must be similar in terms of base and volume. The voltage also of course.
  • Put in the new bulb by checking that it is located at the bottom of its socket.
  • Replace the connectors as they were.
  • Replace all of the front covers.

You can leave us a comment if you have encountered specific problems.