When the clock stops working, it can be annoying. So you have to replace the display bulb Jeep Willys. Even if the dashboard remains functional, we are missing certain information in order to drive in sufficient comfort. This action is not difficult to carry out, but requires a minimum of rigor. It is indeed advisable to take photos at certain stages in order to remember the reverse manipulation, especially for the connectors. To perform this task, plan approximately a small half-hour . In terms of tools, a pair of screwdrivers is enough. Now let's see how to change this bulb, step by step.change-bulb-clock-Jeep-Willys

How to change the bulb on the Willys Jeep display

Depending on the years of production, the methodology may vary a little. It is conceivable that some covers or screws are not identical. We therefore offer you the logic to follow in general.

  • Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. In this case, keep them carefully aside.
  • Once the facade has been completely dismantled, disconnect connectors which connect to the clock bulb of this Jeep Willys. You can therefore remove all the connectors from the block, as long as you remember the location. Help yourself by taking photos if necessary.
  • Normally you can access the broken bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the old one. This should be similar in terms of base and volume. The voltage also obviously.
  • Place the new bulb by checking that it is at the bottom of its socket.
  • Replace the connectors as they were.
  • Replace all of the front covers.

We invite you to leave us a comment if you have encountered specific concerns.