When the clock stops working, it can be unpleasant. So you have to replace the display bulb of this Kia Carens. Although the dashboard remains operational, we are missing several information in order to circulate comfortably. This operation is not difficult to perform, but requires a minimum of thoroughness. We advise you to take pictures at different stages in order to remember the reverse process, especially for the connectors. To complete this task, allow approximately a small half-hour . For tools, a set of screwdrivers will suffice. Now let's see how to change this bulb, point by point.
How to change the Kia Carens display bulb
Depending on the years of circulation, the procedure may vary slightly. It is conceivable that some covers or screws differ. We therefore offer you the logic to follow in general.
- Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry into the grooves. It happens that you have to remove several screws. In this situation, keep them preciously aside.
- Once the facade has been completely dismantled, disconnect connectors connected to the clock bulb of this Kia Carens. You can thus remove all the connectors from the block, provided you remember the location. Help yourself by taking pictures if needed.
- Normally you can access the defective bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. This should be similar in terms of base and volume. The tension as well, of course.
- Put in the new bulb making sure it is at the bottom of its location.
- Replace the connectors in their location.
- Replace all of the front covers.
You can leave a comment if you have encountered particular problems.