When the clock stops working, it can get annoying. So you have to replace the display bulb from the Kia Carnival. Although the dashboard is still operational, we are missing several pieces of information to drive comfortably. This manipulation is not difficult to perform, but requires a minimum of rigor. We advise you to take photos at different stages to remind you of the reverse approach, especially for connectors. To carry out this manipulation, count approximately a small half-hour . In terms of tools, a set of screwdrivers should suffice. Now let's look at how to replace this bulb, point by point.
How to change the bulb on the Kia Carnival display
Depending on the release dates, the method may vary a little. It is likely that several covers or screws differ. Here is therefore the logic to be followed in general.
- Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this situation, keep them carefully aside.
- Once the facade is completely dismantled, disconnect connectors which connect to the clock bulb of this Kia Carnival. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if necessary.
- You can normally access the broken bulb. Gently remove the bulb of the clock.
- Compare the new bulb with the previous one. This should be similar in terms of base and volume. The voltage also obviously.
- Place the new bulb making sure it is at the bottom of its location.
- Replace the connectors as they were.
- Replace all of the front covers.
You can leave us a comment if you have encountered specific concerns.