When the clock stops lighting up, it can get annoying. It will therefore be necessary to replace the display bulb of this Kia Cee D 2. Even if the dashboard remains operational, some indications are missing in order to drive in good conditions. This action is not hard to perform, but requires a minimum of thoroughness. It is also advisable to take photos at different stages in order to remember the reverse manipulation, especially concerning the connectors. To carry out this manipulation, plan approximately a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's see how to replace this bulb, point by point.
How to change the bulb on the Kia Cee D 2 display
Depending on the years of production, the procedure may vary a little. It is conceivable that several covers or screws differ. So that's the logic to follow in general.
- Start by remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove more than one screw. In this case, keep them carefully aside.
- Once the facade has been completely removed, it will disconnect connectors which connect to the clock bulb of the Kia Cee D 2. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
- Normally you can have access to the broken bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the old one. The latter must be similar in terms of base and volume. The tension also naturally.
- Place the new bulb making sure it is at the bottom of its socket.
- Put the connectors in place.
- Put all the covers on the front.
We invite you to leave a comment if you have encountered particular malfunctions.