When the clock runs out of light, it can be unpleasant. So you have to change the display bulb of this Kia Clarus. Although the dashboard remains functional, it lacks several pieces of information in order to drive comfortably. This action is not hard to perform, but requires a minimum of thoroughness. It is indeed advisable to take photos at different stages in order to remember the reverse manipulation, especially for connectors. To perform this operation, count approximately a small half-hour . Regarding tools, a pair of screwdrivers should suffice. Now let's take a look at how to change this bulb step by step.
How to change the bulb on the Kia Clarus display
Depending on the release dates, the method may vary slightly. It remains likely that several covers or screws are not identical. So here is the logic to follow in general.
- Start by remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove some screws. Therefore, keep them preciously aside.
- Once the facade is completely dismantled, you need disconnect connectors which connect to the clock bulb of the Kia Clarus. You can thus dismantle all of the block's connectors, provided you remember the location. Help yourself with your camera if needed.
- Normally you can have access to the broken bulb. Gently remove the bulb of the clock.
- Compare the new bulb with the old one. The latter must be identical in terms of base and volume. The tension also obviously.
- Place the new bulb by checking that it is at the bottom of its location.
- Replace the connectors as they were.
- Replace all of the front covers.
Do not hesitate to leave us a comment if you have encountered particular concerns.