When the clock stops working, it can get annoying. So you have to replace the display bulb of the Kia Optima 2 Sw. Although the dashboard remains operational, we are missing several pieces of information in order to drive in good conditions. This action is not hard to perform, but requires a minimum of rigor. We advise you to take photos at certain stages in order to remember the reverse manipulation, especially for connectors. To carry out this manipulation, count approximately a small half-hour . In terms of tools, a pair of screwdrivers is enough. Now let's see how to replace this bulb, point by point.
How to change the bulb on the Kia Optima 2 Sw display
Depending on the years of circulation, the procedure may vary a little. It is likely that some covers or screws are not identical. This is the logic to follow in general.
- Start by remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to take off some screws. In this situation, keep them preciously aside.
- Once the facade has been completely removed, disconnect connectors connected to the clock bulb of your Kia Optima 2 Sw. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
- You can normally access the broken bulb. Gently dismantle the bulb of the clock.
- Compare the new bulb with the previous one. The latter must be identical in terms of base and volume. The tension also naturally.
- Put in the new bulb by checking that it is at the bottom of its location.
- Put the connectors in place.
- Put all the covers on the front.
You can leave us a comment if you have encountered specific concerns.