When the clock runs out of light, it can be annoying. So you have to change the display bulb of the Kia Picanto 2. Even if the dashboard is still functional, we are missing some indications to circulate in good conditions. This operation is not hard to execute, but requires a minimum of rigor. We also advise you to take photos at certain stages to remind you of the reverse manipulation, especially regarding connectors. To carry out this task, plan approximately a small half-hour . In terms of tools, a set of screwdrivers should suffice. Now let's see how to replace this bulb, step by step.change-bulb-clock-Kia-Picanto-2

How to change the bulb on the Kia Picanto 2 display

Depending on the release years, the method may vary slightly. It remains conceivable that several covers or screws are not identical. Here is the procedure to follow in general.

  • Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this case, keep them carefully aside.
  • Once the facade is completely dismantled, you need disconnect connectors connected to the clock bulb of this Kia Picanto 2. You will be able to dismantle all the connectors on the block, provided you remember the location. Help yourself with your camera if it helps you.
  • Normally you can have access to the defective bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the old one. This must be identical in terms of base and volume. The tension too of course.
  • Put in the new bulb by checking that it is at the bottom of its location.
  • Replace the connectors as they were.
  • Replace all of the front covers.

Do not hesitate to leave us a comment if you have encountered particular problems.