When the clock runs out of light, it can be unpleasant. So you have to change the display bulb of the Kia Picanto 3. Even if the dashboard remains operational, we are missing certain indications to circulate in sufficient comfort. This operation is not difficult to perform, but requires a minimum of thoroughness. We also advise you to take photos at certain stages to remind you of the reverse manipulation, especially regarding connectors. To carry out this task, plan around a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's see how to replace this bulb, step by step.change-bulb-clock-Kia-Picanto-3

How to change the bulb on the Kia Picanto 3 display

Depending on the years of circulation, the methodology may vary a little. It is possible that some covers or screws differ. This is therefore the logic to be followed in general.

  • Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. Therefore, keep them carefully aside.
  • Once the facade is completely removed, you need disconnect connectors which connect to the clock bulb of this Kia Picanto 3. You will be able to disassemble all the connectors from the block, provided you remember the location. Help yourself with your camera if needed.
  • Normally you can access the broken bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the previous one. This must be identical in terms of base and volume. The voltage also naturally.
  • Place the new bulb by checking that it is at the bottom of its location.
  • Put the connectors in place as they were.
  • Put all the covers on the front.

You can leave us a comment if you have encountered specific concerns.