When the clock stops working, it can get annoying. So you have to change the display bulb of the Kia Picanto. Although the dashboard remains operational, we lack several information to circulate comfortably. This operation is not hard to perform, but requires a minimum of thoroughness. We also advise you to take photos at different stages to remember the reverse manipulation, especially regarding connectors. To carry out this manipulation, plan approximately a small half-hour . Regarding tools, a pair of screwdrivers should suffice. Now let's take a look at how to change this bulb, step by step.
How to change the bulb on the Kia Picanto display
Depending on the release dates, the method may vary a little. It is conceivable that some covers or screws are not identical. We therefore suggest the procedure to be followed in general.
- Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this situation, keep them carefully aside.
- Once the facade has been completely dismantled, you must disconnect connectors connected to the clock bulb of the Kia Picanto. You will be able to remove all the connectors from the block, provided you remember the location. Help yourself with your camera if needed.
- Normally you can have access to the broken bulb. Gently remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter must be similar in terms of base and volume. The voltage also of course.
- Place the new bulb by checking that it is at the bottom of its location.
- Replace the connectors in their location.
- Replace all of the front covers.
Do not hesitate to leave a comment if you have encountered specific problems.