When the clock stops working, it can get unpleasant. So we will have to change the display bulb of this Kia Pop. Although the dashboard remains operational, we lack certain information to circulate in sufficient comfort. This manipulation is not complex to execute, but requires a minimum of rigor. We also advise you to take photos at different stages to remind you of the opposite approach, especially for connectors. To carry out this operation, count approximately a small half-hour . For tools, a set of screwdrivers is sufficient. Now let's take a look at how to replace this bulb step by step.
How to change the light bulb on the Kia Pop display
Depending on the years of production, the method may vary a little. It is likely that several covers or screws differ. We therefore suggest the procedure to be followed in general.
- Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry into the grooves. Sometimes you have to remove a few screws. In this case, keep them preciously aside.
- Once the facade is completely dismantled, you need disconnect connectors connected to the clock bulb of your Kia Pop. You can thus remove all of the connectors from the block, provided you remember the location. Help yourself with your camera if needed.
- You can normally access the damaged bulb. Gently remove the bulb of the clock.
- Compare the new bulb with the old one. The latter must be identical in terms of base and volume. The voltage also of course.
- Put in the new bulb by checking that it is at the bottom of its location.
- Replace the connectors as they were.
- Replace all of the front covers.
We invite you to leave a comment if you have encountered specific malfunctions.