When the clock stops lighting up, it can get annoying. So you have to change the display bulb of the Kia Pregio. Even if the dashboard remains operational, we are missing several pieces of information in order to drive comfortably. This manipulation is not hard to perform, but requires a minimum of rigor. We advise you to take photos at different stages to remind you of the reverse approach, especially for connectors. To carry out this manipulation, count approximately a small half-hour . In terms of tools, a set of screwdrivers will suffice. Now let's see how to replace this bulb, step by step.
How to change the bulb on the Kia Pregio display
Depending on the release years, the method may vary a little. It is likely that some covers or screws differ. We therefore offer you the logic to follow in general.
- Start by remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. Therefore, keep them carefully aside.
- Once the cover is completely removed, you need disconnect connectors that connect to the clock bulb of your Kia Pregio. This will allow you to remove all the connectors from the block, as long as you remember the location. Help yourself with your camera if it helps you.
- Normally you can access the broken bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the old one. This should be similar in terms of base and volume. The voltage as well obviously.
- Place the new bulb by checking that it is at the bottom of its socket.
- Put the connectors in place.
- Put all the covers on the front.
Do not hesitate to leave a comment if you have encountered specific malfunctions.