When the clock stops working, it can be annoying. So you have to change the display bulb from the Kia Pride Kombi. Although the dashboard remains operational, there are some indications missing to circulate in good conditions. This action is not complex to perform, but requires a minimum of rigor. It is also advisable to take photos at different stages to remember the reverse manipulation, especially regarding the connectors. To complete this task, count about a small half-hour . For tools, a set of screwdrivers should suffice. Now let's see how to replace this bulb, point by point.
How to change the bulb on the Kia Pride Kombi display
Depending on the release dates, the procedure may vary slightly. Some covers or screws may differ. This is the general approach to follow.
- Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. In this case, keep them carefully aside.
- Once the facade has been completely dismantled, disconnect connectors connected to the clock bulb of the Kia Pride Kombi. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
- You can normally access the damaged bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the old one. The latter should be similar in terms of base and volume. The voltage as well obviously.
- Place the new bulb making sure it is at the bottom of its location.
- Replace the connectors in their location.
- Replace all of the front covers.
We invite you to leave us a comment if you have encountered particular problems.