When the clock stops working, it can get annoying. We will therefore have to replace the display bulb of this Kia Pride. Although the dashboard is still functional, we lack some information to circulate in sufficient comfort. This operation is not difficult to perform, but requires a minimum of thoroughness. It is indeed advisable to take photos at certain stages to remind you of the reverse approach, especially regarding connectors. To carry out this manipulation, count approximately a small half-hour . In terms of tools, a set of screwdrivers should suffice. Now let's see how to change this bulb, point by point.
How to change the bulb on the Kia Pride display
Depending on the year of discharge, the procedure may vary slightly. It is conceivable that several covers or screws are not identical. This is therefore the procedure to be followed in general.
- Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. In this case, keep them carefully aside.
- Once the facade has been completely removed, you must disconnect connectors connected to the Kia Pride clock bulb. You can thus remove all the connectors from the block, provided that you remember the location. Help yourself with your camera if it helps you.
- You can normally have access to the broken bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the old one. The latter should be similar in terms of base and volume. The voltage also naturally.
- Put in the new bulb by checking that it is located at the bottom of its socket.
- Replace the connectors as they were.
- Replace all of the front covers.
We invite you to leave us a comment if you have encountered particular problems.