When the clock runs out of light, it can be unpleasant. It will therefore have to change the display bulb of this Kia Pro Cee D 2 Gt. Although the dashboard remains functional, some information is missing in order to circulate in sufficient comfort. This action is not complex to perform, but requires a minimum of thoroughness. It is advisable to take pictures at certain stages in order to remember the reverse process, especially concerning the connectors. To complete this task, allow approximately a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's look at how to replace this bulb, step by step.
How to change the display bulb of the Kia Pro Cee D 2 Gt
Depending on the year of release, the procedure may vary slightly. It is likely that several covers or screws differ. We therefore offer you the logic to follow in general.
- Start by remove the covers of the front panel which impede access to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove some screws. In this situation, keep them carefully aside.
- Once the facade has been completely removed, disconnect connectors connected to the Kia Pro Cee D 2 Gt clock bulb. You can thus remove all the connectors from the unit, provided you remember the location. Help yourself with your camera if necessary.
- You can normally access the defective bulb. Gently dismantle the bulb of the clock.
- Compare the new bulb with the old one. The latter must be similar in terms of base and volume. The tension also naturally.
- Place the new bulb by checking that it is located at the bottom of its socket.
- Put the connectors in place as they were.
- Put all the covers on the front.
You can leave a comment if you have encountered particular problems.