When the clock stops working, it can be annoying. So you have to replace the display bulb of this Kia Pro Cee D 2. Even if the dashboard remains operational, there are some indications missing to circulate comfortably. This operation is not complex to perform, but requires a minimum of rigor. It is indeed advisable to take photos at certain stages to remember the reverse process, especially for connectors. To accomplish this task, count roughly a small half-hour . Regarding tools, a pair of screwdrivers should suffice. Now let's look at how to change this bulb, point by point.
How to change the bulb on the Kia Pro Cee D 2 display
Depending on the year of circulation, the procedure may vary a little. It remains likely that some covers or screws are not identical. Here is therefore the procedure to follow in general.
- Start by remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove some screws. Therefore, keep them preciously aside.
- Once the cover is completely removed, you need disconnect connectors connected to the clock bulb of this Kia Pro Cee D 2. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if necessary.
- Normally you can have access to the broken bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the previous one. The latter must be identical in terms of base and volume. The tension also of course.
- Put in the new bulb by checking that it is located at the bottom of its socket.
- Put the connectors in place as they were.
- Put all the covers on the front.
We invite you to leave a comment if you have encountered specific problems.