When the clock stops lighting up, it can get annoying. So you have to change the display bulb of this Kia Pro Cee D. Even if the dashboard remains functional, it lacks some information in order to circulate comfortably. This action is not difficult to perform, but requires a minimum of rigor. We also advise you to take photos at different stages in order to remember the reverse manipulation, especially for connectors. To perform this task, plan approximately a small half-hour . For tools, a set of screwdrivers is sufficient. Now let's see how to change this bulb, point by point.
How to change the bulb on the Kia Pro Cee D display
Depending on the release year, the procedure may vary a little. It is possible that several covers or screws are not identical. Here is the logic to follow in general.
- Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry into the grooves. Sometimes you have to remove a few screws. In this situation, keep them preciously aside.
- Once the facade has been completely dismantled, disconnect connectors connected to the clock bulb of the Kia Pro Cee D. You can thus remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
- Normally you can have access to the defective bulb. Gently remove the bulb of the clock.
- Compare the new bulb with the previous one. This should be similar in terms of base and volume. The voltage also obviously.
- Place the new bulb making sure it is at the bottom of its location.
- Replace the connectors as they were.
- Replace all of the front covers.
You can leave a comment if you have encountered particular malfunctions.