When the clock stops working, it can be annoying. So you have to change the display bulb of this Kia Provo. Even if the dashboard is still operational, we are missing several indications to circulate in sufficient comfort. This action is not difficult to perform, but requires a minimum of thoroughness. We also advise you to take photos at different stages to remind you of the reverse manipulation, especially for connectors. To carry out this manipulation, plan approximately a small half-hour . In terms of tools, a set of screwdrivers should suffice. Now let's take a look at how to replace this bulb, point by point.change-bulb-clock-Kia-Provo

How to change the bulb on the Kia Provo display

Depending on the production dates, the method may vary slightly. Some covers or screws may differ. This is the general approach to follow.

  • Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. In this situation, keep them preciously aside.
  • Once the facade has been completely removed, you must disconnect connectors connected to the clock bulb of your Kia Provo. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself with your camera if it helps you.
  • Normally you can have access to the defective bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the old one. This must be identical in terms of base and volume. The tension also of course.
  • Put in the new bulb by checking that it is at the bottom of its location.
  • Replace the connectors as they were.
  • Replace all of the front covers.

We invite you to leave us a comment if you have encountered specific concerns.