When the clock stops working, it can get annoying. So you have to change the display bulb of the Kia Rio 2. Although the dashboard is still operational, some information is missing in order to drive in sufficient comfort. This operation is not complex to perform, but requires a minimum of rigor. We also advise you to take photos at certain stages in order to remember the reverse process, especially for connectors. To perform this task, plan approximately a small half-hour . In terms of tools, a set of screwdrivers is enough. Now let's take a look at how to replace this bulb step by step.
How to change the bulb on the Kia Rio 2 display
Depending on the production dates, the procedure may vary a little. It remains likely that some covers or screws are not identical. So that's the general approach to follow.
- Start by remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. In this situation, keep them carefully aside.
- Once the facade has been completely removed, it will disconnect connectors which connect to the clock bulb of your Kia Rio 2. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself by taking photos if necessary.
- You can normally have access to the damaged bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter should be similar in terms of base and volume. The tension also of course.
- Place the new bulb by checking that it is at the bottom of its location.
- Put the connectors in place as they were.
- Put all the covers on the front.
You can leave us a comment if you have encountered specific malfunctions.