When the clock runs out of light, it can be annoying. It will therefore have to change the display bulb of this Kia Rio 3. Even if the dashboard remains functional, we lack some indications to circulate in sufficient comfort. This operation is not complex to perform, but requires a minimum of thoroughness. It is also advisable to take photos at certain stages to remind you of the reverse manipulation, especially concerning the connectors. To accomplish this task, count approximately a small half-hour . For tools, a set of screwdrivers should suffice. Now let's look at how to replace this bulb, point by point.change-bulb-clock-Kia-Rio-3

How to change the bulb on the Kia Rio 3 display

Depending on the release dates, the methodology may vary a little. Several covers or screws may differ. Here is therefore the procedure to be followed in general.

  • Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. In this case, keep them preciously aside.
  • Once the facade is completely dismantled, disconnect connectors connected to the clock bulb of this Kia Rio 3. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself with your camera if it helps you.
  • Normally you can have access to the defective bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the previous one. The latter should be similar in terms of base and volume. The voltage also naturally.
  • Put in the new bulb by checking that it is at the bottom of its socket.
  • Put the connectors in place.
  • Put all the covers on the front.

You can leave us a comment if you have encountered any particular concerns.