When the clock has no more light, it can become annoying. So you have to change the display bulb of this Kia Rio 4. Even if the dashboard remains operational, we are missing certain indications in order to drive in good conditions. This action is not hard to perform, but requires a minimum of rigor. It is indeed advisable to take photos at different stages in order to remember the reverse manipulation, especially concerning the connectors. To carry out this operation, plan approximately a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's see how to replace this bulb, point by point.change-bulb-clock-Kia-Rio-4

How to change the bulb on the Kia Rio 4 display

Depending on the year of discharge, the procedure may vary a little. It is possible that some covers or screws differ. This is therefore the procedure to be followed in general.

  • Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to take off some screws. In this case, keep them preciously aside.
  • Once the facade has been completely removed, disconnect connectors connected to the clock bulb of this Kia Rio 4. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if necessary.
  • Normally you can have access to the defective bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the previous one. This must be identical in terms of base and volume. The tension also obviously.
  • Place the new bulb making sure it sits well at the bottom of its socket.
  • Replace the connectors as they were.
  • Replace all of the front covers.

We invite you to leave us a comment if you have encountered particular problems.