When the clock stops working, it can get annoying. So you have to change the display bulb of the Kia Rio. Even if the dashboard remains operational, there are certain indications missing to circulate comfortably. This operation is not difficult to perform, but requires a minimum of thoroughness. It is indeed advisable to take photos at different stages to remind you of the opposite approach, especially regarding connectors. To carry out this manipulation, plan approximately a small half-hour . In terms of tools, a pair of screwdrivers is enough. Now let's see how to change this bulb, point by point.
How to change the bulb on the Kia Rio display
Depending on the release dates, the methodology may vary a little. It is likely that some covers or screws differ. So that's the logic to follow in general.
- Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. In this case, keep them carefully aside.
- Once the facade has been completely removed, disconnect connectors connected to the clock bulb of this Kia Rio. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself by taking photos if it can be useful to you.
- You can normally have access to the broken bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the previous one. The latter should be similar in terms of base and volume. The tension also of course.
- Put in the new bulb by checking that it is at the bottom of its socket.
- Replace the connectors in their location.
- Replace all of the front covers.
We invite you to leave a comment if you have encountered specific malfunctions.