When the clock runs out of light, it can get annoying. So you have to change the display bulb of the Kia Rocsta. Although the dashboard remains functional, we are missing certain indications in order to circulate in good conditions. This operation is not complex to perform, but requires a minimum of rigor. It is indeed advisable to take photos at different stages in order to remember the reverse process, especially for connectors. To carry out this manipulation, plan approximately a small half-hour . Regarding tools, a pair of screwdrivers should suffice. Now let's see how to change this bulb, step by step.change-bulb-clock-Kia-Rocsta

How to change the bulb on the Kia Rocsta display

Depending on the release dates, the procedure may vary slightly. It is possible that some covers or screws differ. This is the general approach to follow.

  • Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. Therefore, keep them preciously aside.
  • Once the facade has been completely dismantled, disconnect connectors which connect to the clock bulb of the Kia Rocsta. You can therefore remove all of the connectors from the block, provided you remember the location. Help yourself with your camera if it helps you.
  • Normally you can access the damaged bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the previous one. This should be similar in terms of base and volume. The tension as well, of course.
  • Place the new bulb by checking that it is located at the bottom of its socket.
  • Put the connectors in place.
  • Put all the covers on the front.

You can leave a comment if you have encountered particular problems.