When the clock runs out of light, it can get annoying. We will therefore have to replace the display bulb of the Kia Sephia. Although the dashboard remains operational, we lack several indications to circulate in sufficient comfort. This operation is not complex to execute, but requires a minimum of rigor. We also advise you to take photos at different stages to remind you of the reverse process, especially for connectors. To perform this task, count approximately a small half-hour . In terms of tools, a pair of screwdrivers should suffice. Now let's look at how to change this bulb, point by point.
How to change the bulb on the Kia Sephia display
Depending on the year of circulation, the method may vary slightly. It remains likely that some covers or screws are not identical. Here is the procedure to follow in general.
- Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this situation, keep them preciously aside.
- Once the facade is completely removed, you need disconnect connectors that connect to the clock bulb of the Kia Sephia. You will therefore be able to dismantle all of the block's connectors, provided you remember the location. Help yourself by taking photos if it can be useful to you.
- Normally you can access the damaged bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the old one. This must be identical in terms of base and volume. The voltage also obviously.
- Put in the new bulb by checking that it is at the bottom of its location.
- Replace the connectors as they were.
- Replace all of the front covers.
Please do not hesitate to leave us a comment if you have encountered specific concerns.