When the clock stops lighting up, it can get annoying. So you have to change the display bulb of the Kia Sorento 2. Although the dashboard is still functional, we are missing some information in order to drive in good conditions. This action is not difficult to perform, but requires a minimum of thoroughness. It is indeed advisable to take photos at certain stages in order to remember the reverse manipulation, in particular concerning the connectors. To do this, count about a small half-hour . For tools, a set of screwdrivers will suffice. Now let's see how to change this bulb, point by point.
How to change the bulb on the Kia Sorento 2 display
Depending on the year of circulation, the procedure may vary slightly. It is possible that some covers or screws are not identical. We therefore suggest the procedure to be followed in general.
- Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove some screws. In this situation, keep them preciously aside.
- Once the facade is completely removed, you need disconnect connectors which connect to the clock bulb of your Kia Sorento 2. You can thus remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if necessary.
- You can normally have access to the damaged bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. This should be similar in terms of base and volume. The tension also of course.
- Place the new bulb by checking that it is at the bottom of its socket.
- Replace the connectors in their location.
- Replace all of the front covers.
You can leave us a comment if you have encountered particular malfunctions.