When the clock stops working, it can get annoying. So you have to replace the display bulb of this Kia Soul 2. Although the dashboard remains operational, it lacks some indications to drive comfortably. This action is not difficult to perform, but requires a minimum of thoroughness. We advise you to take pictures at certain stages to remind you of the reverse manipulation, especially concerning the connectors. To carry out this operation, count approximately a small half-hour . In terms of tools, a set of screwdrivers will suffice. Now let's take a look at how to change this bulb step by step.change-bulb-clock-Kia-Soul-2

How to change the display bulb of the Kia Soul 2

Depending on the years of production, the methodology may vary a little. It remains likely that some covers or screws are not identical. This is therefore the logic to be followed in general.

  • Start by remove the covers front panel that prevent access to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove a few screws. Therefore, keep them carefully aside.
  • Once the facade has been completely removed, disconnect connectors which connect to the Kia Soul 2 clock bulb. You will be able to remove all the connectors from the unit, provided you remember the location. Help yourself by taking pictures if that can be helpful.
  • You can normally have access to the broken bulb. Gently remove the bulb of the clock.
  • Compare the new bulb with the old one. This should be similar in terms of base and volume. The tension also naturally.
  • Place the new bulb making sure it is at the bottom of its location.
  • Replace the connectors as they were.
  • Replace all of the front covers.

You can leave a comment if you have encountered specific malfunctions.