When the clock runs out of light, it can be unpleasant. It will therefore have to change the display bulb of this Kia Stinger. Even if the dashboard remains functional, we are missing some indications in order to circulate comfortably. This manipulation is not difficult to execute, but requires a minimum of rigor. It is indeed advisable to take photos at different stages in order to remember the reverse manipulation, especially concerning the connectors. To carry out this manipulation, count approximately a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's see how to replace this bulb, point by point.change-bulb-clock-Kia-Stinger

How to change the bulb on the Kia Stinger display

Depending on the years of production, the method may vary a little. Some covers or screws may differ. So here is the logic to follow in general.

  • Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. In this situation, keep them carefully aside.
  • Once the facade has been completely removed, you must disconnect connectors connected to the clock bulb of your Kia Stinger. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself by taking photos if necessary.
  • Normally you can have access to the defective bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the previous one. The latter should be similar in terms of base and volume. The voltage as well obviously.
  • Place the new bulb by checking that it is at the bottom of its location.
  • Put the connectors in place as they were.
  • Put all the covers on the front.

Please do not hesitate to leave us a comment if you have encountered specific concerns.