When the clock stops working, it can get annoying. So you have to replace the display bulb of this Kia Venga. Although the dashboard is still operational, we are missing some information in order to circulate comfortably. This action is not difficult to carry out, but requires a minimum of rigor. It is indeed advisable to take photos at different stages in order to remember the reverse process, especially regarding connectors. To carry out this operation, plan approximately a small half-hour . For tools, a set of screwdrivers will suffice. Now let's look at how to change this bulb, step by step.
How to change the bulb on the Kia Venga display
Depending on the years of circulation, the methodology may vary slightly. It is possible that some covers or screws are not identical. We therefore suggest the procedure to be followed in general.
- Start by remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this case, keep them carefully aside.
- Once the facade has been completely removed, you must disconnect connectors that connect to the clock bulb of this Kia Venga. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself with your camera if needed.
- You can normally have access to the broken bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the old one. This must be identical in terms of base and volume. The tension as well, of course.
- Put in the new bulb making sure it is at the bottom of its location.
- Put the connectors in place as they were.
- Put all the covers on the front.
You can leave a comment if you have encountered particular malfunctions.