When the clock stops lighting up, it can be annoying. So you have to change the display bulb of the Kiaage 2. Even if the dashboard is still functional, several pieces of information are missing in order to drive comfortably. This operation is not hard to perform, but requires a minimum of rigor. We advise you to take pictures at different stages in order to remind you of the reverse process, especially for the connectors. To carry out this manipulation, plan approximately a small half-hour . For tools, a set of screwdrivers should suffice. Now let's take a look at how to change this bulb step by step.change-bulb-clock-Kiaage-2

How to change the Kiaage 2 display bulb

Depending on the year of release, the procedure may vary slightly. It is possible that several covers or screws differ. This is the general process to follow.

  • Start with remove the covers front panel that prevent access to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove some screws. In this situation, keep them carefully aside.
  • Once the facade has been completely dismantled, disconnect connectors which connect to the clock bulb of this Kiaage 2. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself by taking pictures if that can be helpful.
  • You can normally have access to the defective bulb. Gently dismantle the bulb of the clock.
  • Compare the new bulb with the previous one. This should be similar in terms of base and volume. The voltage also of course.
  • Put in the new bulb making sure it is at the bottom of its location.
  • Replace the connectors in their location.
  • Replace all of the front covers.

Do not hesitate to leave a comment if you have encountered particular concerns.