When the clock doesn't work, it can be annoying. It will therefore be necessary to change the display bulb of this Kiaage 3. Even if the dashboard remains operational, it lacks several indications to circulate comfortably. This action is not complex to perform, but requires a minimum of thoroughness. We advise you to take pictures at certain stages to remind you of the reverse process, especially concerning the connectors. To complete this task, allow about a small half-hour . In terms of tools, a pair of screwdrivers should suffice. Now let's see how to replace this bulb, point by point.
How to change the Kiaage 3 display bulb
Depending on the production dates, the methodology may vary slightly. It remains likely that some covers or screws differ. We therefore suggest the procedure to be followed in general.
- Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove several screws. In this situation, keep them carefully aside.
- Once the facade has been completely removed, disconnect connectors which connect to the clock bulb of this Kiaage 3. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself by taking pictures if needed.
- You can normally access the damaged bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. This should be similar in terms of base and volume. The tension also obviously.
- Place the new bulb making sure it is at the bottom of its socket.
- Put the connectors in place as they were.
- Put all the covers on the front.
You can leave us a comment if you have encountered specific concerns.