When the clock stops lighting up, it can be annoying. So we will have to change the display bulb of this Kiaage 4. Even if the dashboard remains functional, some information is missing to circulate in sufficient comfort. This operation is not difficult to perform, but requires a minimum of thoroughness. We advise you to take pictures at different stages to remember the reverse process, especially concerning the connectors. To complete this task, approximately count a small half-hour . For tools, a set of screwdrivers is sufficient. Now let's take a look at how to change this bulb, point by point.change-bulb-clock-Kiaage-4

How to change the Kiaage 4 display bulb

Depending on the production dates, the method may vary a bit. It is likely that several covers or screws are not identical. Here is the process to follow in general.

  • Start with remove the covers front panel that prevent access to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove some screws. In this case, keep them carefully aside.
  • Once the facade has been completely dismantled, disconnect connectors connected to the clock bulb of this Kiaage 4. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself by taking pictures if that can be helpful.
  • Normally you can access the defective bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the old one. The latter must be similar in terms of base and volume. The voltage as well of course.
  • Put in the new bulb by checking that it is at the bottom of its location.
  • Replace the connectors in their location.
  • Replace all of the front covers.

We invite you to leave us a comment if you have encountered particular problems.