When the clock stops working, it can be annoying. So you have to change the display bulb of this Kiaage. Although the dashboard remains functional, we lack some information to circulate in good conditions. This manipulation is not complex to perform, but requires a minimum of rigor. We advise you to take photos at certain stages to remind you of the reverse manipulation, especially regarding connectors. To perform this task, count about a small half-hour . For tools, a set of screwdrivers should suffice. Now let's see how to replace this bulb, step by step.change-bulb-clock-Kiaage

How to change the bulb on the Kiaage display

Depending on the production dates, the methodology may vary slightly. It is conceivable that some covers or screws differ. This is therefore the logic to be followed in general.

  • Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry into the grooves. It happens that you have to remove several screws. In this case, keep them carefully aside.
  • Once the facade is completely dismantled, you must disconnect connectors that connect to the clock bulb of this Kiaage. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself by taking photos if necessary.
  • Normally you can have access to the damaged bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the previous one. This should be similar in terms of base and volume. The voltage also obviously.
  • Put in the new bulb by checking that it is at the bottom of its socket.
  • Put the connectors in place as they were.
  • Put all the covers on the front.

You can leave us a comment if you have encountered any particular concerns.