When the clock runs out of light, it can get annoying. So you have to replace the display bulb Lancia 2000. Although the dashboard remains functional, we are missing some information in order to drive comfortably. This action is not difficult to perform, but requires a minimum of thoroughness. It is also advisable to take pictures at different stages in order to remember the reverse manipulation, especially concerning the connectors. To carry out this manipulation, plan on approximately a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's take a look at how to replace this bulb, point by point.
How to change the display bulb of the Lancia 2000
Depending on the years of production, the procedure may vary slightly. It is conceivable that several covers or screws differ. Here is the general process to follow.
- Start by remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. Therefore, keep them carefully aside.
- Once the facade has been completely removed, disconnect connectors connected to the clock bulb of your Lancia 2000. You can thus remove all the connectors from the unit, provided you remember the location. Help yourself with your camera if needed.
- You can normally have access to the defective bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the old one. This must be identical in terms of base and volume. The voltage also of course.
- Place the new bulb making sure it sits well at the bottom of its socket.
- Put the connectors in place.
- Put all the covers on the front.
We invite you to leave us a comment if you have encountered specific concerns.