When the clock stops working, it can get annoying. So you have to change the display bulb of the Lancia Appia. Although the dashboard is still operational, we are missing certain indications in order to drive in good conditions. This manipulation is not complex to perform, but requires a minimum of rigor. We advise you to take photos at certain stages in order to remember the reverse process, especially regarding connectors. To carry out this operation, count approximately a small half-hour . In terms of tools, a pair of screwdrivers should suffice. Now let's take a look at how to replace this bulb, step by step.change-bulb-clock-Lancia-Appia

How to change the light bulb on the Lancia Appia display

Depending on the release dates, the procedure may vary slightly. It is conceivable that several covers or screws differ. We therefore propose the logic to be followed in general.

  • Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. Therefore, keep them carefully aside.
  • Once the facade has been completely dismantled, you must disconnect connectors connected to the clock bulb of this Lancia Appia. You will be able to remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
  • You can normally access the defective bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the previous one. The latter should be similar in terms of base and volume. The tension as well obviously.
  • Place the new bulb by checking that it is at the bottom of its socket.
  • Put the connectors in place.
  • Put all the covers on the front.

We invite you to leave a comment if you have encountered specific problems.