When the clock stops lighting up, it can get unpleasant. It will therefore be necessary to replace the display bulb of the Lancia Aurelia. Even if the dashboard is still functional, there are some indications missing to circulate comfortably. This action is not difficult to perform, but requires a minimum of rigor. It is also advisable to take photos at certain stages to remind you of the reverse manipulation, especially for connectors. To carry out this operation, plan about a small half-hour . In terms of tools, a pair of screwdrivers should suffice. Now let's see how to replace this bulb, point by point.change-bulb-clock-Lancia-Aurelia

How to change the light bulb on the Lancia Aurelia display

Depending on the years of production, the procedure may vary slightly. It is conceivable that some covers or screws are not identical. We therefore suggest the procedure to be followed in general.

  • Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove more than one screw. In this case, keep them carefully aside.
  • Once the facade is completely dismantled, you need disconnect connectors which connect to the clock bulb of the Lancia Aurelia. You can thus remove all the connectors from the block, as long as you remember the location. Help yourself with your camera if it helps you.
  • Normally you can have access to the broken bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the old one. This must be identical in terms of base and volume. The tension as well, of course.
  • Place the new bulb by checking that it is at the bottom of its socket.
  • Replace the connectors as they were.
  • Replace all of the front covers.

Do not hesitate to leave us a comment if you have encountered particular concerns.