When the clock runs out of light, it can get unpleasant. So you have to replace the display bulb of this Lancia Beta Spyder. Even if the dashboard remains functional, some indications are missing in order to drive in good conditions. This operation is not complex to perform, but requires a minimum of thoroughness. We also advise you to take photos at certain stages in order to remind you of the reverse manipulation, particularly concerning connectors. To carry out this task, plan approximately a small half-hour . For tools, a set of screwdrivers should suffice. Now let's look at how to replace this bulb, point by point.change-bulb-clock-Lancia-Beta-Spyder

How to change the light bulb on the Lancia Beta Spyder display

Depending on the years of circulation, the procedure may vary slightly. It is conceivable that some covers or screws differ. This is the general approach to follow.

  • Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove a few screws. In this situation, keep them preciously aside.
  • Once the facade has been completely removed, you must disconnect connectors which connect to the clock bulb of your Lancia Beta Spyder. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
  • You can normally have access to the damaged bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the previous one. The latter should be similar in terms of base and volume. The tension also naturally.
  • Put in the new bulb making sure it sits well at the bottom of its socket.
  • Put the connectors in place as they were.
  • Put all the covers on the front.

Do not hesitate to leave a comment if you have encountered particular problems.