When the clock stops lighting up, it can be unpleasant. So you have to change the display bulb of this Lancia Beta. Even if the dashboard remains operational, certain indications are missing in order to circulate in sufficient comfort. This manipulation is not hard to execute, but requires a minimum of rigor. We also advise you to take photos at different stages in order to remember the reverse process, especially for connectors. To execute this operation, count approximately a small half-hour . In terms of tools, a pair of screwdrivers is enough. Now let's see how to change this bulb, point by point.change-bulb-clock-Lancia-Beta

How to change the light bulb on the Lancia Beta display

Depending on the year of discharge, the procedure may vary a little. It is likely that several covers or screws differ. So that's the general approach to follow.

  • Start by remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this situation, keep them carefully aside.
  • Once the facade has been completely removed, you must disconnect connectors connected to the clock bulb of this Lancia Beta. You can therefore remove all of the connectors from the block, provided you remember the location. Help yourself by taking photos if necessary.
  • Normally you can access the damaged bulb. Gently dismantle the bulb of the clock.
  • Compare the new bulb with the previous one. The latter must be identical in terms of base and volume. The voltage as well of course.
  • Place the new bulb making sure it is at the bottom of its socket.
  • Put the connectors in place.
  • Put all the covers on the front.

Do not hesitate to leave us a comment if you have encountered specific malfunctions.