When the clock stops lighting up, it can be annoying. So you have to replace the display bulb of the Lancia Compact Mpv. Although the dashboard is still operational, it lacks some information to drive in sufficient comfort. This manipulation is not hard to perform, but requires a minimum of rigor. It is advisable in fact to take pictures at certain stages to remind you of the reverse process, in particular concerning the connectors. To complete this task, plan approximately a small half-hour . Regarding tools, a pair of screwdrivers should suffice. Now let's see how to replace this bulb, point by point.change-bulb-clock-Lancia-Compact-Mpv

How to change the display bulb of the Lancia Compact Mpv

Depending on the release dates, the method may vary slightly. It is conceivable that several covers or screws differ. Here is the logic to follow in general.

  • Start with remove the covers front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. Therefore, keep them carefully aside.
  • Once the facade has been completely dismantled, you must disconnect connectors which connect to the clock bulb of the Lancia Compact Mpv. You will be able to remove all the connectors from the block, provided you remember the location. Help yourself with your camera if necessary.
  • Normally you can access the defective bulb. Gently remove the bulb of the clock.
  • Compare the new bulb with the previous one. The latter should be similar in terms of base and volume. The tension also naturally.
  • Place the new bulb making sure it is at the bottom of its location.
  • Replace the connectors in their location.
  • Replace all of the front covers.

You can leave us a comment if you have encountered specific concerns.