When the clock has no more light, it can be annoying. It will therefore be necessary to replace the display bulb of the Lancia Delta 2 Hf. Although the dashboard is still functional, we are missing some information in order to drive comfortably. This operation is not hard to execute, but requires a minimum of rigor. It is indeed advisable to take photos at certain stages in order to remember the reverse manipulation, especially concerning the connectors. To execute this manipulation, count approximately a small half-hour . For tools, a set of screwdrivers will suffice. Now let's see how to change this bulb, point by point.
How to change the bulb on the Lancia Delta 2 Hf display
Depending on the years of circulation, the methodology may vary a little. It remains likely that some covers or screws are not identical. This is therefore the logic to be followed in general.
- Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove more than one screw. Therefore, keep them preciously aside.
- Once the facade has been completely dismantled, you must disconnect connectors connected to the clock bulb of this Lancia Delta 2 Hf. You can thus dismantle all of the block's connectors, provided you remember the location. Help yourself by taking photos if it can be useful to you.
- You can normally access the damaged bulb. Gently remove the bulb of the clock.
- Compare the new bulb with the old one. The latter should be similar in terms of base and volume. The tension also of course.
- Place the new bulb making sure it is at the bottom of its location.
- Replace the connectors as they were.
- Replace all of the front covers.
Do not hesitate to leave a comment if you have encountered specific malfunctions.