When the clock is out of light, it can be unpleasant. So you have to change the display bulb Lancia Delta 2. Even if the dashboard is still functional, we lack several indications to circulate in sufficient comfort. This operation is not hard to perform, but requires a minimum of thoroughness. We advise you to take pictures at certain stages to remind you of the reverse manipulation, especially for the connectors. To complete this task, allow about a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's take a look at how to change this bulb step by step.change-bulb-clock-Lancia-Delta-2

How to change the light bulb on the Lancia Delta 2 display

Depending on the years of production, the procedure may vary a little. It remains conceivable that some covers or screws are not identical. Here is the logic to follow in general.

  • Start by remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove a few screws. In this case, keep them preciously aside.
  • Once the facade is completely dismantled, disconnect connectors connected to the Lancia Delta 2 clock bulb. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself with your camera if necessary.
  • Normally you can have access to the defective bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the old one. This should be similar in terms of base and volume. The tension also obviously.
  • Put in the new bulb by checking that it is at the bottom of its location.
  • Replace the connectors as they were.
  • Replace all of the front covers.

Please do not hesitate to leave us a comment if you have encountered specific concerns.