When the clock runs out of light, it can get unpleasant. So we will have to change the display bulb of this Lancia Delta. Even if the dashboard is still operational, we are missing some indications to circulate comfortably. This action is not complex to execute, but requires a minimum of thoroughness. We also advise you to take photos at different stages to remember the reverse manipulation, especially for connectors. To carry out this operation, count approximately a small half-hour . In terms of tools, a pair of screwdrivers is enough. Now let's see how to replace this bulb, step by step.change-bulb-clock-Lancia-Delta

How to change the light bulb on the Lancia Delta display

Depending on the years of production, the methodology may vary slightly. It is still possible that some covers or screws differ. This is therefore the logic to be followed in general.

  • Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. Therefore, keep them preciously aside.
  • Once the facade is completely removed, you must disconnect connectors which connect to the clock bulb of this Lancia Delta. You can therefore remove all of the connectors from the block, provided you remember the location. Help yourself by taking photos if necessary.
  • Normally you can access the defective bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the old one. The latter must be identical in terms of base and volume. The voltage as well obviously.
  • Put in the new bulb making sure it is at the bottom of its location.
  • Replace the connectors in their location.
  • Replace all of the front covers.

Do not hesitate to leave us a comment if you have encountered specific problems.