When the clock runs out of light, it can be annoying. So you have to replace the display bulb of this Lancia. Although the dashboard remains functional, we are missing some information in order to drive in sufficient comfort. This action is not difficult to perform, but requires a minimum of rigor. We advise you to take pictures at different stages in order to remember the reverse process, especially for the connectors. To carry out this manipulation, allow approximately a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's see how to change this bulb, step by step.
How to change the display bulb of the Lancia
Depending on the production dates, the method may vary slightly. It is conceivable that some covers or screws are not identical. So that's the logic to follow in general.
- Start by remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. Therefore, keep them preciously aside.
- Once the facade has been completely removed, disconnect connectors connected to the Lancia clock bulb. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself with your camera if that can help.
- Normally you can access the defective bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the old one. The latter must be similar in terms of base and volume. The tension also of course.
- Put in the new bulb by checking that it is at the bottom of its location.
- Replace the connectors as they were.
- Replace all of the front covers.
Do not hesitate to leave a comment if you have encountered particular malfunctions.