When the clock stops working, it can be annoying. So you have to replace the display bulb of the Mazda Sassou. Even if the dashboard is still functional, we lack certain information to circulate comfortably. This action is not hard to execute, but requires a minimum of rigor. It is indeed advisable to take photos at certain stages to remember the reverse manipulation, especially for connectors. To carry out this operation, plan approximately a small half-hour . For tools, a set of screwdrivers will suffice. Now let's see how to change this bulb, point by point.
How to change the bulb on the Mazda Sassou display
Depending on the years of circulation, the method may vary slightly. It remains possible that several covers or screws are not identical. Here is therefore the procedure to follow in general.
- Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. Therefore, keep them carefully aside.
- Once the facade has been completely removed, disconnect connectors that connect to the clock bulb of your Mazda Sassou. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
- You can normally access the defective bulb. Gently dismantle the bulb of the clock.
- Compare the new bulb with the previous one. The latter must be identical in terms of base and volume. The tension too of course.
- Place the new bulb making sure it is at the bottom of its location.
- Replace the connectors in their location.
- Replace all of the front covers.
Do not hesitate to leave a comment if you have encountered particular malfunctions.