When the clock runs out of light, it can get annoying. So you have to replace the display bulb of the Opel Movano Combi. Although the dashboard is still functional, we are missing some indications in order to drive in good conditions. This action is not complex to perform, but requires a minimum of rigor. It is indeed advisable to take photos at certain stages in order to remember the reverse manipulation, especially for connectors. To carry out this manipulation, plan approximately a small half-hour . In terms of tools, a set of screwdrivers is enough. Now let's take a look at how to replace this bulb step by step.
How to change the bulb on the display of the Opel Movano Combi
Depending on the year of circulation, the procedure may vary slightly. It remains likely that some covers or screws are not identical. So here is the logic to follow in general.
- Start by remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. In this situation, keep them preciously aside.
- Once the facade has been completely removed, you must disconnect connectors connected to the clock bulb of your Opel Movano Combi. You can thus remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if necessary.
- Normally you can have access to the broken bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the old one. This should be similar in terms of base and volume. The tension also naturally.
- Put in the new bulb making sure it sits well at the bottom of its socket.
- Replace the connectors as they were.
- Replace all of the front covers.
You can leave a comment if you have encountered specific concerns.